)
 |
 |
 |
 |
) |
) |
- Needle bearings at all pivots with external grease ports
- Laterally stiff rear suspension
- Full custom CNC machined rear suspension components
- ISCG-05 standard chain guide mount, 73mm BB, front derailleur capable
- Gusseted, “ONEPOINTFIVE” standard head tube, dual crown capable
- Two travel settings: 190mm (7.5 inches) or 216mm (8.5 inches).
- Colors: Matte Gunmetal Grey or RAW
- Sizes: S, M, L, XL
- MSRP: $1635, with Manitou SW 4-Way Coil. Manitou SW 6-Way Coil, Fox DHX 5.0 Coil, Marzocchi Roco TST R or Roco RC World Cup (Optional)
It’s tough to please everyone. Precisely why you seldom see little old ladies driving Hummers, you too may want a frame specifically designed for the way YOU ride. On that same note, we sent off our engineers on a mission to morph, shape, and manipulate the Blitz until they squeezed out an extra 1-2 inches of travel and optimized the geometry to handle the latest maximum travel dual or single crown forks in the market. We received many requests to build a frame like this. Versus delivers with the Trigger.
The Trigger is a purpose built extreme freeride frame for those who live for the big. With rear travel settings for 190 mm (7.5 inches) or 216 mm (8.5 inches) you can tame the most hostile territory and tackle any terrain. With a front derailleur coupled with the amazing pedal-ability of the Trigger suspension, shuttling can still be optional. The 12 mm x 150 mm rear dropout spacing and ONEPOINTFIVE standard head tube gives you that extra edge of confidence while rippin’ down your favorite chute or pinning that death defying gap.
Hold the Trigger in your fingers, and you could swear that it was machined and honed out of one block of aluminum in Switzerland. This quality level and attention to detail is where we will never compromise. Every detail of this frame was designed to provide you with the ultimate frame for FRX indulgence.
 |
ALL DIMENSIONS ARE IN INCHES AND MEASURED WITH A 23.1 INCH AXLE TO CROWN FORK |
FRONT DERAILLEUR SIZE & TYPE |
BOTTOM BRACKET WIDTH |
REAR HUB AXLE AND SPACING | SEAT POST SIZE |
SEAT POST COLLAR SIZE |
|||||||||
| SIZES | RIDER (RECM.) | ST | TT (EFF.) | CS | WB | SH | HTL | HA (DEG) | SA (DEG) | BBH | |||||
| SMALL | 5'2"-5'7" | 16.0 | 21.6 | 17.5 | 45.3 | 30.0 | 4.8 | 66.0 | 73.0 | 15.5 | 34.9MM TOP PULL | 73MM | 12MM X 150MM | 30MM | 35.0MM |
| MEDIUM | 5'6"-5'10" | 17.0 | 22.6 | 17.5 | 46.3 | 30.0 | 4.8 | 66.0 | 73.0 | 15.5 | 34.9MM TOP PULL | 73MM | 12MM X 150MM | 30MM | 35.0MM |
| LARGE | 5'9"-6'2" | 19.0 | 23.6 | 17.5 | 47.3 | 31.0 | 4.8 | 66.0 | 73.0 | 15.5 | 34.9MM TOP PULL | 73MM | 12MM X 150MM | 30MM | 35.0MM |
| X-LARGE | >6'2" | 20.0 | 24.3 | 17.5 | 48.0 | 31.0 | 4.8 | 66.0 | 73.0 | 15.5 | 34.9MM TOP PULL | 73MM | 12MM X 150MM | 30MM | 35.0MM |